Forum

I have a basic 10X10 EZ Up tent (with 4 PVC/cement corner weights) and I have nine 36X60 panels.  The panels are custom made, and are very strong.  They are covered with indoor/outdoor grey carpeting, and the core is 3/8 plywood lined with Styrofoam to accommodate easy usage of curtain hooks for random product placement.  They are capable of hanging significant weight in framed products.  The panels have galvanized conduit for legs (removable for transport), and are connected at the top by using zip ties.  I have also two carry boxes for prints.  Each box is split at a 30 deg angle so at events, the box opens into two display holders (two transport boxes open into four display holders) .  Each box is approximately 34" wide, 12" deep, and 20" high, and are covered inside and out with the the same carpeting material as the panels.  They have snap latches to hold the two halves together when in transport mode, and handles on the side for carrying (in the photo below, the latches and carry handles had not been installed yet).  I am asking $500 for the panels and all required hardware, $200 for the two carry/display boxes, and $50 for the tent.  I will be very open to complete package offers.  Contact me at (412) 735-2974, or e-mail me at ghe.gedpi@gmail.com.